美國發布FCC認證要求針對信號放大器
2016年2月12日，修訂并公布美國FCC認證程序信號放大器文件KDB935210，涉及到FCC認證部分20.21,90.219,22,24,27,90主要內容說明如下：
1.廢除版本KDB935210 D01，其內容被引入作為KDB935210 D02;
引進新的監管框架，包括網絡(luò )保護標準的2.FCC信號放大器，包括消費減少的技術和操作要求信號放大器無線網絡(luò )的潛在干擾;
3.文件KDB935210 D02認證要求，總結，22，24，27和認證要求，相關參數以及工業和消費類信號放大器的定義范圍內的90信號放大器運行FCC部分20;
4.文件935210 D03，為消費者提供信號放大器測量程序;
5.文件935210 D04，消費者的信號放大器測量程序的特殊供應商;
6。文件935210 D05，為工業信號放大器測量程序。
原內容
FCC Report and Order(FCC 13-21 and rules modified per Order FCC-14-138)introduced a new regulatory framework for signal boosters，including the introduction of a Network Protection Standard that specifies the technical and operational requirements necessary to minimize the potential for interference from consumer signal boosters to wireless networks.These new requirements are codified in §§ 20.21 and 90.219.
The attachment 935210 D02 Certification Requirements summarizes the certification requirements and associated parameters and definitions for consumer and industrial signal boosters that operate under Parts 20、22、24、27 and 90 of the FCC rules.
The attachment 935210 D03 Signal Booster Measurements provides guidance for demonstrating compliance to the various requirements for Wideband Consumer Signal Boosters as specified in § 20.21(e)，Consumer Signal Booster Network Protection Standard Technical Requirements and Interference Safeguards.
The attachment 935210 D04 Provider-Specific Booster Measurements provides guidance for demonstrating compliance to the various requirements for Provider-Specific Consumer Signal Boosters as specified in § 20.21(e)，Consumer Signal Booster Network Protection Standard Technical Requirements and Interference Safeguards.
The attachment 935210 D05 Indus Booster Basic Meas provides guidance for demonstrating compliance to the various requirements for Industrial Signal Boosters.
Note: The previous attachment 935210 D01 has been expired and the content has been incorporated in 935210 D02.
FCC報告和規則(FCC13-21和規則每筆訂單修改FCC-14-138)推出了一款新的監管框架進行信號的助推器，包括采用網絡(luò )保護標準，指定要盡量減少潛在的技術和操作要求從消費的信號干擾的助推器無線networks.These新的要求編入§§20.21和90.219。
附件935210 D02認證要求概括為，根據零部件20,22,24,27和FCC規則第90經營消費品和工業信號助推器認證要求和相關參數和定義。
附件935210 D03信號增強器的測量表明符合為W上的各種要求提供了指導ideband消費者信號放大器如§20.21(E)的規定，消費者信號增強網絡(luò )保護標準的技術要求和干擾保障。
附件935210 D04提供者特有的助推器測量提供了指導，如§20.21(E)的規定證明其符合為提供者特定的消費信號放大器的各種要求，消費者信號Booster網絡(luò )保護標準的技術要求和干擾保障。
附件935210 D05梧桐助推器基礎：測量用于展示符合工業信號放大器的各種要求提供了指導。
注：以前的附件935210 D01已經過期，內容已在935210 D02被納入。
微信
報告查詢